PowerPulse
EcoFlow PowerPulse
Turn Solar into Mileage
Harness solar power like never before. The PowerPulse charger turns boundless solar energy into a sustainable fuel source for your electric vehicle.
PowerOcean Synergy
Perfect Synergy with PowerOcean
Break free from the limitations of conventional charging. PowerPulse adapts to your charging needs. Whether operating solo or seamlessly syncing with PowerOcean solutions, it elevates your EV charging experience to perfection.
Instant Solar Power, in 3-2-1
PowerOcean instantly harnesses photovoltaic energy, optimises energy consumption, provides exceptional load management, and delivers immediate power to your EV.
An Energetic Insight
The PowerInsight provides real-time visibility into your solar energy generation and uses, simplifying energy management with just a tap on your phone.
Flexible and Independent
Charging at home is all about convenience. That's why we designed the PowerPulse to charge your EV seamlessly, even without integration with the PowerOcean system.
Fast Charging
Full Throttle Charging at 11kW
PowerPulse delivers an impressive 11kW output, infusing up to 65 miles of range into your EV in just an hour. With advanced controls and precise microsecond calibration, it optimises solar energy absorption and load management, taking charging speeds to a new height.

Efficiency in Every Inch

Designed smaller than A4-sized paper, PowerPulse effortlessly fits into any space, making charging simple and convenient.

178mm

Width

283mm

Height

99mm

Depth

178mm

Width

283mm

Height

99mm

Depth

210mm

297mm

Elegant Wiring. Sleekly Designed.
Encased in a sleek, lightweight frame, PowerPulse promises easy installation, whether indoor or outdoor. Built-in cable channels maintain a clutter-free and orderly charging station.

Uncompromised Security and Safety

Safety remains paramount for us. PowerPulse's thermal sensors persistently track operational conditions to prevent overheating. The system also automatically turns off once the EV battery is fully charged.

Steer Your Solar Journey

Navigate solar energy effortlessly with the PowerPulse app. Track consumption, set charging schedules, prioritise vehicles, manage energy reserves, and more. Gain ultimate control over your solar charging performance.

Expert Installation Recommended

For optimal performance and safety, it's best to have your PowerPulse EV charger installed by a qualified electrician. While EcoFlow specialises in providing top-notch charging solutions, we encourage you to connect with a trusted local electrician for installation. This ensures compliance with local electrical codes and peak efficiency.

Fit in your house

Use AR to see PowerPulse in your space

Open this page on your smartphone or tablet to view.

See how it works in AR

Open this page using Safari on your iPhone or iPad.

* All specifications and descriptions shown may differ from the actual specification of the product. EcoFlow reserves the right to make changes and amendments to the product shown and described here at any time without prior notice of such change. All functionality, features, specifications, design and other product information displayed in this webpage including, but not limited to, components, performance, availability, and capabilities of the product are subject to change without notice. The contents and simulated images within the screen are for demonstration purposes only.
Charging

Voltage:

230V (single phase), 400V (three phase)Current: 16 A Mains frequency: 50Hz/60Hz

Schedule Charging:

Set charging current and time via EcoFlow app

Dynamic Load Balancing:

Adjust charging power dynamically based on household power

PV & PowerOcean Linkage Mode:

Store, charge, and use solar power intelligently according to household power usage

Safety Protection

Safety Protection:

Over-voltage, Under-voltage, Over Current, Over Temperature, Short-Circuit, Residual Current, Grounding, Lightning

RCD Protection:

6mA DC, 30mA AC TYPE-A

Connectivity

Connectivity:

IEEE 802.11 b/g/n 2.4 GHz Wi-Fi Ethernet Bluetooth RS485

Firmware Features:

Open platform with support for OCPP (Open Charge Point Protocol) 1.6J and MODBUS-RTU Over-the-air (OTA) firmware updates

Interaction:

Ecoflow App

Weight and Dimensions

Dimensions (WxHxD):

178mm x 283mm x 99 mm (without cable)

Weight:

3 kg (with cable)

Cable:

5m Cable IEC 62196-2 Type 2

Charger Bracket (WxHxD):

120mm x 172mm x 80mm

Enclosure:

IP65 rated for indoor and outdoor installation IK10 rated

LED Light:

Colour LEDs to indicate charger status and fault condition on both the wall charger and the EV connector

Compliance

EN IEC61851-1:2019, EN IEC61851-21-2:2021, EN300328 V2.2.2, EN300330 V2.1.1, EN301489-1 V2.2.3, EN301489-17 V3.2.4, EN301489-3 V2.3.2, EN IEC61000-6-1:2019, EN IEC61000-6-3:2021, EN IEC62311:2020, IEC62955:2018EN60529:1991+A1:2000+A2:2013, EN62196-1:2014, EN IEC62196-2:2022, EN50620:2017+A1:2019, EN61984:2009 EN60529:1991+A1:2000+A2:2013, 2011/65/EU+2015/863, 1907/2006, 1907/2006, 1907/2006, 2019/1021, 2012/19/EU, (EU) 2022/30, EN303645

Warranty

24 months

Charging

Voltage:

230V (single phase), 400V (three phase)Current: 16 A Mains frequency: 50Hz/60Hz

Schedule Charging:

Set charging current and time via EcoFlow app

Dynamic Load Balancing:

Adjust charging power dynamically based on household power

PV & PowerOcean Linkage Mode:

Store, charge, and use solar power intelligently according to household power usage

Safety Protection

Safety Protection:

Over-voltage, Under-voltage, Over Current, Over Temperature, Short-Circuit, Residual Current, Grounding, Lightning

RCD Protection:

6mA DC, 30mA AC TYPE-A

Connectivity

Connectivity:

IEEE 802.11 b/g/n 2.4 GHz Wi-Fi Ethernet Bluetooth RS485

Firmware Features:

Open platform with support for OCPP (Open Charge Point Protocol) 1.6J and MODBUS-RTU Over-the-air (OTA) firmware updates

Interaction:

Ecoflow App

Weight and Dimensions

Dimensions (WxHxD):

178mm x 283mm x 99 mm (without cable)

Weight:

3 kg (with cable)

Cable:

5m Cable IEC 62196-2 Type 2

Charger Bracket (WxHxD):

120mm x 172mm x 80mm

Enclosure:

IP65 rated for indoor and outdoor installation IK10 rated

LED Light:

Colour LEDs to indicate charger status and fault condition on both the wall charger and the EV connector

Compliance

EN IEC61851-1:2019, EN IEC61851-21-2:2021, EN300328 V2.2.2, EN300330 V2.1.1, EN301489-1 V2.2.3, EN301489-17 V3.2.4, EN301489-3 V2.3.2, EN IEC61000-6-1:2019, EN IEC61000-6-3:2021, EN IEC62311:2020, IEC62955:2018EN60529:1991+A1:2000+A2:2013, EN62196-1:2014, EN IEC62196-2:2022, EN50620:2017+A1:2019, EN61984:2009 EN60529:1991+A1:2000+A2:2013, 2011/65/EU+2015/863, 1907/2006, 1907/2006, 1907/2006, 2019/1021, 2012/19/EU, (EU) 2022/30, EN303645

Warranty

24 months